Archive for November, 2015

CiM colour testing: Indian Summer, Dirty Laundry and a little more Ogre

Indian Summer

Indian Summer is an interesting one – it’s a striking amber.

15.10.05_Indiansummerstriking

I took an on-mandrel pic to show the striking.

15.10.05_indiansummer_dirtylaundry_spacers

Here are Indian Summer and Dirty Laundry spacers. Indian Summer didn’t etch particularly consistently – the very dark bead appeared to etch more. Dirty Laundry is an opal white, and looks as expected here.

I expected both of these colours to be reactive so had hope for the silver glass results.

15.10.18_indiansummer_luna_boreas

The bead on the right here shows that Indian Summer is not good as a surface encasing colour – it just gets too dark, especially as this bead had a core of Indian Summer as well. The silver glass in that one was Luna 2.1 which is mostly transparent and you can just see some streaks round the middle. The other two beads had a core of 006 clear, encased in Indian Summer, then Luna 2.1 scrolls on the left and Boreas dots in the centre bead. Both promising: the Luna 2.1 scrolls have sharp light edges in some places and fuzzier edges but a defined centre in others – those are the purpler more transparent areas. The Boreas dots have a concentrated very shiny centre, then a ring where it appears the Indian summer has displaced it, then an outer ring which has a shiny area and then a dark sharp outer line.

15.11.07_indiansummer_luna_boreas_01

I then did a pair which have an Indian Summer core, a spiral of silver glass and encased in 006. Very interesting! Boreas is on the left – the core looks extremely dark and the boreas is a dark blue with bright green edges fading to brown. (Ignore the grey bubbles at the bottom – the end of my clear was dirty and I didn’t notice until too late).

15.11.07_indiansummer_luna_boreas_02

The Luna 2.1 bead (right) is the usual pinky-purple and has developed blue-green lines and haze in the centre of each spiral. The edges of the spiral are the lighter amber areas.

Dirty Laundry

15.10.07_dirtylaundry_luna_boreas

Luna 2.1 scrolls on the left, Boreas dots on the right. Both colours get some slight outlining effects, but what is most interesting is the different ways the base has fumed in each case. Under the Boreas, the Dirty Laundry has gone a cold yellow-green, while under the Luna 2.1 it has flushed a warm colour. (Boreas isn’t a great colour to put over pale white or tan opaques because as a transparent purple it will always show brownish).

These next two are fabulous though.

15.11.07_dirtylaundry_luna_boreas_01

These are both encased in 006. The silver glass in both cases has a mottled and feathered look with noticeable edges. The Boreas on the right is blue-purple and the Dirty Laundry underneath has fumed a darker caramel brown. The Luna 2.1 bead on the left is lovely. The silver glass has again formed dark then light lines in the centre, and the darker amber lines are the gaps between the spirals. The Dirty Laundry hasn’t fumed very far though, leaving cloudy white ends which I love.

15.11.07_dirtylaundry_luna_boreas_02

Here you can see the Dirty Laundry parts of the Boreas bead – they have still fumed somewhat tan and have darker outlines rather than the fuzzy ones with the Luna 2.1.

Ogre

Finally, a silver glass pair on Ogre.

15.10.07_ogre_luna_boreas

Luna 2.1 scrolls and Boreas dots, as before. You can see slight separation lines around the edges of the scrolls, and the Boreas dots are again very shiny and have sharp brown rings around them. Around the beadholes has also tended to go brown. Quite interesting for organic beads.

, , , , , , , , , , , , , , , ,

Leave a comment

CiM colour testing: Charlotte and Limelight

These are both very pretty transparents.

Limelight is a clean, cool green with no hints of yellow. Charlotte is a warm pink that is saturated enough to hold its own. I don’t think we’ve had anything else in 104 quite this colour (not counting CiM’s Paris, out at the same time and very similar). Both have a tendency to develop microbubbles, especially Charlotte – if you heat them further out they may get fewer.

15.10.05_limelightcharlotte_spacers

(The last Charlotte spacer was half out of the etching liquid on this side – I left it like this because I liked it).

15.10.05_charlotte_comparison

Here’s a comparison with a couple of other pinks I had to hand – Lauscha transparent pink is a baby pink and cooler in tone than Charlotte. I think the very pale one is Effetre rose quartz 067 – it is definitely Effetre, and their transparent pink tends to be a little peachier most of the time. You can see how well the colour shows in the etched Charlotte. I’d call this a cherry blossom colour. (The dark violet is just there because it was on the same string as the pink).

I then tried encasing silver glass with these transparents. I’ve been using Boreas for this for a while – it is a transparent reducing purple. This time I also added Luna 2.1 which is a mostly transparent striking colour.

15.10.05_limelight_lunaboreas_01

This is a core of clear encased in Double Helix Luna 2.1 (left) and Boreas (middle and right) encased with limelight. I did two with the boreas because I had an insufficient reduction moment with the middle bead. The limelight is pale enough that you don’t notice it much. There’s some good electric blue from the boreas on the right, and you can see the range of striking that Luna gets, from opaque yellow to transparent pinky purple. Probably not the best use for limelight, just because you can’t really tell it is there and it doesn’t appear to be affecting the silver glass.

15.10.05_limelight_lunaboreas_02

Above is a second view of the limelight beads.

15.10.18_charlotte_luna_boreas

I did the same thing with Charlotte – this time I did two Boreas beads because the thicker encasing on the rightmost bead just ended up a murky green-brown. The middle bead has a thinner encasing and you can see some hints of pink at the top, while over the most reduced areas it is still the weird greenish colour. Silver tends to fume pinks brown – I don’t think I’ve ever tried similar with a transparent pink before. Luna 2.1 on the left is a better match – the pretty pink wisps inside go with the encasing. On the whole, you probably want this glass to look like itself rather than use it with silver glass though. (You can also see some areas of the microbubbles on these beads – once they’re there, you can’t get rid of them).

, , , , , , , , , , , , ,

3 Comments

CiM colour testing: Ogre, Leaf Men

Continuing my writeup of the September batch of new CiM colours, here are a pair of opaque greens: Ogre and Leaf Men.

15.10.07_ogre_leafmen

Ogre was a remake of Tortoise that came out an entirely different shade – I must say, I love it more than Tortoise. The light green and warm brown it develops are a lovely autumnal combo, cleaner than the purple that Tortoise gets.

I took a picture on the mandrel so you can see how the spacers struck. (Making more than three spacers of this size on a mandrel does not work for me – if I do more and let the early ones cool, one or two will crack, no matter how careful I am not to let the flame brush the first ones. So I do the ‘keep all three warm’ method and they survive). On the mandrel with three Ogre beads, the one nearest the end went into the kiln a light grey-blue, which is the colour this looks when not struck at all – it went green in the kiln.

15.10.05_ogrestriking

Ogre gremlin on its own: multiple strikings on areas has given the pinkier brown.

15.10.05_ogregremlin_01

Ogre and Leaf Men spacers side-by-size. Ogre is lovely and soft etched.

15.10.05_ogre_leafmen_spacers

Leaf Men is streaky as you would expect from green and nicely… leafy. Not bright, not olive.

Leaf Men gremlin:

15.10.07_leafmengremlin_01

, , , , , , , , , , , ,

Leave a comment

Sewing: BoC bags

Here are some more bags for Beads of Courage that I made in October.

Two in green camo-print and another red car bag.

15.10.05_BoCcamobags

Here we have a swan, a blue and peach swirly feathery design (I have a fair bit of that, in odd-shaped long thin pieces – it’s an 80s possibly-wax-print fabric), and a gold on beige patterned bag. I really love the way that one looks with the burnt orange I used to line it.

15.10.05_BoCswanswirlbags_01

Rearranged so you can see the feathery one.

15.10.05_BoCswanswirlbags_02

I’ve just received some Designers Guild kids range samplers (also Scrapstore), and there are some really lovely and cute pieces in there, so I will be making bags from those next.

I also made myself a new pincushion – since I have two sewing machines now, I keep finding my pincushion is at the wrong one… (My current pincushion is one I made at primary school – two squares of felt hand-sewn together). This is a Scrapstore fabric that I’m hoarding somewhat since I love the design, suns and planets on red – I decided to use a little bit of it to make something for me.

15.08.23_sunpincushion_02 15.08.23_sunpincushion_01

I stuffed it with thread offcuts – I keep those along with trimmed frayed edges and other tiny little unusable scraps in a box for this kind of thing.

15.08.23_threadstuffing

I also did a little experimenting with fabric paints – the ones I used here are Pebeo paints, but I also have medium to add to my normal acrylics, and I have some Procion dyes. Paint sits on top of the fabric so makes it stiffer – I thought of using dye for most of it and then possibly adding thin lines for illustration with paint, if I want to illustrate it. I was just doodling with this to see how the paint worked. (White fabric also from the Scrapstore). The frame is a quilting hoop that is very handy for this – I noticed that The Works had small hoops when I was there, so got a pair of those too for smaller pieces of fabric.

15.08.16_bluegreendoodle_01

, , , , , , , , , , , , , , , , , , , ,

Leave a comment

%d bloggers like this: